#!/bin/sh
# 
# this script requires iptables package to be
# installed on your machine


# Where to find iptables binary
IPT="/sbin/iptables"
# The network interface you will use
# WAN is the one connected to the internet
# LAN the one connected to your local network
WAN="eth0"
LAN="eth1"
# First we need to clear up any existing firewall rules
# and chain which might have been created
$IPT -F
$IPT -F INPUT
$IPT -F OUTPUT
$IPT -F FORWARD
$IPT -F -t mangle
$IPT -F -t nat
$IPT -X

# Default policies: Drop any incoming packets
# accept the rest.
$IPT -P INPUT DROP
$IPT -P OUTPUT ACCEPT
$IPT -P FORWARD ACCEPT

# To be able to forward traffic from your LAN
# to the Internet, we need to tell the kernel
# to allow ip forwarding
echo 1 > /proc/sys/net/ipv4/ip_forward

# Masquerading will make machines from the LAN
# look like if they were the router
$IPT -t nat -A POSTROUTING -o $WAN -j MASQUERADE


$IPT -t nat -A PREROUTING -i $WAN -p tcp --dport 2222 -j DNAT --to-destination 192.168.2.2:22
$IPT -A FORWARD -i $WAN -p tcp  --dport 22 -m state --state NEW -j ACCEPT

# Do not allow other new or invalid connections to reach your internal network
$IPT -A FORWARD -i $WAN -m state --state NEW,INVALID -j DROP

# Accept any connections from the local machine
$IPT -A INPUT -i lo -j ACCEPT
# plus from your local network
$IPT -A INPUT -i $LAN -j ACCEPT

# log those packets and inform the sender that the packet was rejected
$IPT -N Rejectwall
$IPT -A Rejectwall -m limit --limit 10/minute -j LOG --log-prefix "Rejectwall: "
$IPT -A Rejectwall -j REJECT
# use the following instead if you want to simulate that the host is not reachable
# for fun though
#$IPT -A Rejectwall -j REJECT  --reject-with icmp-host-unreachable

$IPT -A INPUT -p icmp -j ACCEPT

# Accept ssh connections from the Internet
$IPT -A INPUT -i $WAN -p tcp --dport 22 -j ACCEPT

# or only accept from a certain ip
#$IPT -A INPUT -i $WAN -s 125.124.123.122 -p tcp --dport 22 -j ACCEPT

# Accept related and established connections
$IPT -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT

# Drop netbios from the outside, no log, just drop
$IPT -A INPUT -p udp --sport 137 --dport 137 -j DROP

# Finally, anything which was not allowed yet
# is going to go through our Rejectwall rule
$IPT -A INPUT -j Rejectwall